2020. 2. 26. 14:58ㆍ카테고리 없음
One of the major problems that has plagued Windows XP is it’s never had the facility to install itself onto some newer hardware without the need for extra steps. Although SATA, AHCI and RAID enabled storage controllers have been around for several years, the Windows XP install CD never gained the ability to install directly onto this hardware, and you need a floppy disk with the necessary drivers for XP to be able to recognize your hard drives during setup. If you don’t use a driver floppy, you will get the dreaded “” error.Download a floppy SATA/RAID driver, extract it to floppy disk and then when installing XP, you need to press F6 at the specified time to install the driver. However, most desktop computers and all laptops don’t come with a floppy drive these days, and what makes it worse is you cannot use anything else such as a USB stick to put the drivers on, it MUST be a floppy drive. Although you can use an external USB floppy drive, it would be a waste to buy one just to use it for installing Windows XP. Recently we found a workaround that can enable you to after pressing F6, but this solution is known to be not 100% working on all computers.In order to get around having to use a floppy drive, you can integrate the floppy SATA/RAID driver into the Windows XP CD yourself.
- Windows 7 Sata Drivers Download
- Sata Ahci Driver Windows 10 Download
- Sata Ahci Controller Driver Windows 7
This way, you can install Windows XP on a SATA hard drive without using a floppy drive at all because the driver is already present on the CD. You’ll need to have an XP CD or the source files contained on one stored on your hard drive, the floppy SATA/RAID driver which can be downloaded from the motherboard manufacturer’s website and a CD/DVD writer. Here are 2 ways to integrate the SATA drivers into your Windows XP CD allowing installation without the need of a floppy drive. 1: Integrate SATA drivers using nLiteThis first method uses the update and driver integrating tool nLite to add the drivers to the Windows XP CD.
Just about everyone looking to customize their Windows XP install CD has heard of this tool.1. And install nLite.2. Download the SATA driver from the motherboard or laptop manufacturer’s website and extract it to a new folder.
Alternatively, you might be able to download a newer driver from the SATA or RAID chipset manufacturer such as the drivers from the Intel website for their chipsets. Make sure to get a standalone floppy driver if available or a driver package that includes a floppy driver.3. Run nLite and select the language to use.
Next you need to specify where the Windows XP installation files are. If you already have a folder on you hard drive with the XP CD contents, point to that. If not, insert your XP CD and browse to your disc’s drive letter, select a folder location for it to save to and then wait for it to copy. Click Next once done, and Next again to skip the Presets screen.4. At Task Selection, click Drivers and Bootable ISO. Click Next.5.
Now click the Insert button at the bottom and select “Multiple driver folder”, choose the folder where the extracted drivers are and click OK. If there are multiple choices, select the correct drivers to integrate. For example, do not select 64 bit drivers on a 32 bit Windows XP. Click OK when done selecting the drivers. Click Next.6.
If this next screen doesn’t appear, you don’t have the correct driver. The driver needs to be of a Textmode type and not a PNP type to be included in the XP setup. Make sure Textmode driver is the selected mode and to choose the exact type of hardware chipset in your system.
Windows 7 Sata Drivers Download
If you’re not sure, check the documentation or the manufacturers website. For our hardware below we want the Intel ICH9R chipset. Select the drivers you require and click OK and then click Next, and finally OK to start the process.7. Once the integration has completed, click Next to be taken to the ISO creation and burning screen.
You can create a bootable ISO to later on, or even burn to CD directly using Direct Burn option. To create and save an ISO simply click the Create Image mode option and then Make ISO.
With the help of an ISO file, you could then.The next integration method on page 2 is far easier to get working if you can’t find the right floppy SATA/RAID driver because it makes a universal SATA Windows CD.
Alright, I've been trying to install 64-bit Windows Vista Home Premium for the last week or so on this new machine. I have a Seagate Barracuda 7200 rpm 3gb/s SATA hard drive and am using an Asus P5Q motherboard. I get to the 'Where do you want to install Windows?' Screen and nothing shows up on the list.
I've tried to install all possible drivers I can get my hands on and NOTHING is working. =/ I wish that I could get this up and running, but I've absolutely scoured the internet and have yet to find a solution. I have tried both SATA controllers on my board, different hard drives, different boards, and I even tried to install 32-bit Vista with the same luck.
Any advice at all would be extremely helpful, even if the advice is to buy 64-bit Win XP =(.Side Note: In the process of building this new machine, my old machine coded on me and I had to install 32-bit Windows Vista Ultimate because I had lost my XP disks. Well, I was able to install everything without a single hitch and am doing all my troubleshooting on this machine still, so I'm just even more confused and upset about the whole thing because I know I'm doing everything I possibly can and I've yet to find an answer.Please help. Hi,Regarding the detail steps to install SATA driver, I got a detail steps from a MVP:1.Turn your PC On2.As the PC starts quickly insert the Windows Vista DVD into the DVD drive3.If all goes well a black screen should appear with the legend 'Press any key to boot from CD or DVD.'
Sata Ahci Driver Windows 10 Download
If you miss this screen just reboot your machine again4. At the 'Press any key to boot from CD or DVD' screen Press Enter or any other key to start the Windows Installation5.Windows will now start loading files into memory6.After files have been loaded the screen will change to a black screen with a green progress bar. Beneath the progress bar are the Microsoft copyright details7.After a short while the language selection screen will appear. Select the desired language, and then click the Next button8.The Install screen will now appear9.On the Install screen Press the Install Now button10.At the next screen Insert your Windows Product Code number and press Enter11.Next you need to accept the EULA (End User Licence Agreement).
Place a Tick in the Accept box and then Click the Next button12.At the next screen you will need to Select your Installation type. As you are performing c Clean install only the Custom option will be available for selection13.The next screen asks 'Where do you want to install Windows'14.On this screen, bottom left hand corner, you will see an option marked Load Drivers. Click on this option15.To install the device driver(s) you will need to insert the installation media that came with the RAID/SATA drives and which contains the relevant driver(s). This media can be floppy disk, CD/DVD or USB flash drive.
Once you have inserted the media into the relevant drive, Click the OK button16.The system will now search the media for the relevant driver(s)17.After the search has been completed the driver(s) will appear in the 'Select the driver to be installed' Window18.Select the relevant driver and then click Next19.The driver will now be installed20.If more than one driver requires to be installed, repeat steps 17 to 19 until the necessary drivers have been installed21.After all drivers have been installed, click the Next button to continue installing Windows Vista.Hope it helps. Hi,Regarding the detail steps to install SATA driver, I got a detail steps from a MVP:1.Turn your PC On2.As the PC starts quickly insert the Windows Vista DVD into the DVD drive3.If all goes well a black screen should appear with the legend 'Press any key to boot from CD or DVD.' If you miss this screen just reboot your machine again4. At the 'Press any key to boot from CD or DVD' screen Press Enter or any other key to start the Windows Installation5.Windows will now start loading files into memory6.After files have been loaded the screen will change to a black screen with a green progress bar. Beneath the progress bar are the Microsoft copyright details7.After a short while the language selection screen will appear. Select the desired language, and then click the Next button8.The Install screen will now appear9.On the Install screen Press the Install Now button10.At the next screen Insert your Windows Product Code number and press Enter11.Next you need to accept the EULA (End User Licence Agreement). Place a Tick in the Accept box and then Click the Next button12.At the next screen you will need to Select your Installation type.
Sata Ahci Controller Driver Windows 7
As you are performing c Clean install only the Custom option will be available for selection13.The next screen asks 'Where do you want to install Windows'14.On this screen, bottom left hand corner, you will see an option marked Load Drivers. Click on this option15.To install the device driver(s) you will need to insert the installation media that came with the RAID/SATA drives and which contains the relevant driver(s). This media can be floppy disk, CD/DVD or USB flash drive. Once you have inserted the media into the relevant drive, Click the OK button16.The system will now search the media for the relevant driver(s)17.After the search has been completed the driver(s) will appear in the 'Select the driver to be installed' Window18.Select the relevant driver and then click Next19.The driver will now be installed20.If more than one driver requires to be installed, repeat steps 17 to 19 until the necessary drivers have been installed21.After all drivers have been installed, click the Next button to continue installing Windows Vista.Hope it helps.